Problem: One major Alberta SAGD operator drew its process water from a deep source well (500-600 meters) containing brackish water. The water had a high chloride content and was contaminated by solid particles finer than beach sand. It was not possible to detect...
Problem: A Canadian Pulp and Paper Mill was having difficulty controlling steam temperatures. The plant required two steam operating conditions – 11.4 bar (165 psig) and 5.5 bar (80 psig). The plant foreman wanted to change the desuperheater for the 11.4 bar...
Issue After replacing a leaking actuated main steam attemperator block valve for the 3rd time in 3 years, a Canadian combined utility company contacted Armour Valve in search of a more reliable solution. The utility company had tried different ball valve options in...
I am a mechanical engineer with 30 years of plant, sales and service experience. I have been on both sides of the desk and can relate with you when issues arise in the plant. You can trust that I won’t recommend a product unless I know that it will do the job for you.
Marc Soucy, P.Eng
Directeur National des Ventes
J’ai un diplôme en génie mécanique avec 30 ans d’expérience dans les usines, les ventes, et le service. J’ai été de chaque côté du bureau et je comprends lorsque des problèmes font surface dans l’usine, l’importance que l’on doit y apporter. Vous pouvez être sûr que je ne recommanderai pas un produit à moins que je sache qu’il convient à votre application.
