HORA Regelarmenturen Automatic Pump Recirculation Valve
HORA Regelarmenturen Automatic Pump Recirculation Valve
SUPPLIER: HORA Regelarmenturen
AVAILABILITY: Canada
HORA automatic recirculation valves are service friendly and durable, extending the lifecycle of your centrifugal pump.
HORA recirculation valves are in-line serviceable, reducing maintenance time. A special piston design and control levels minimize impact of system vibration and pulsations for optimal performance. High pressure and low-pressure models available to ensure fit with your application.
Design Parameters
- Boiler feedwater systems
- Centrifugal pump protection
- Minimum flow bypass
Frequently Asked Questions
Find quick answers to some of the most common questions
How does the HORA Automatic Recirculation Valve protect the pump at low flow?
HORA’s Automatic Recirculation Valve automatically opens a dedicated minimum‑flow bypass when mainline flow drops below the pump’s safe operating limit. The valve uses a mechanical flow‑sensing disc that reacts to decreasing flow and opens the bypass without any external signals. This ensures continuous cooling and prevents overheating, cavitation, and dry‑running damage.
Does the HORA Automatic Recirculation Valve require instrumentation or DCS control?
Hora’s Automatic Recirculation Valve is a fully mechanical, self‑acting valve . It does not require flow transmitters, control valves, PLC logic, or DCS integration. All modulation of the bypass line is performed internally by the valve’s mechanical sensing mechanism.
How does the HORA Automatic Recirculation Valve handle high differential pressures in the bypass line?
Hora uses a multi‑stage pressure‑reducing trim in the bypass section. This staged trim reduces pressure in controlled increments, keeping fluid pressure above vapor pressure and preventing cavitation.
What operating conditions commonly cause Automatic Recirculation Valves to fail, and how does HORA address them?
Common ARV failure modes include sticking caused by debris, unstable bypass modulation during transient pump conditions, and cavitation damage in high‑ΔP bypass lines. HORA’s ARV design directly addresses these issues through guided moving elements that prevent disc vibration or jamming, hardened trim materials for erosive service, multi‑stage bypass trim for cavitation control, and a robust mechanical actuation system engineered to respond reliably during rapid flow changes.
Can the HORA Automatic Recirculation Valve be serviced in‑line?
Yes. HORA designs its Automatic Recirculation Valves for full in‑line serviceability. Internal components — including the flow‑sensing disc, spring assembly, and bypass trim — can be accessed and replaced without removing the valve body from the piping. This reduces downtime and simplifies pump‑room maintenance.







